Easy to Care for Beautiful Fabric
With proper care and cleaning, our acrylic fabrics are made to withstand
the inevitable stains and wear from everyday living,
ensuring you’ll enjoy Outdura fabric season after season.
Acrylic Fabric General Cleaning and Care
How to clean:
- Remove any loose dirt.
Remove (don’t rub) spills with a clean, dry cloth. - Mix a mild solution of soap and warm water (do not exceed 100° F).
Apply to the affected area allowing the mixture to soak into the fabric and gently scrub with a soft bristle brush. - As an alternative you can use our TEXGARD® CLEANER and follow the instructions on the bottle.
- Rinse the fabric thoroughly, removing all soap residue.
Using a garden hose may make this step easier. - Blot fabric with a clean towel, soaking up as much moisture as possible. Let fabric air dry completely.
- To renew the water resistance please use our TEXGARD® PROTECTOR.
What you’ll need:
- Clean, dry towels
- Soft bristle brush
- Spray Bottle
- Dish detergent
- Bucket of water or garden hose
- Dishwashing sponge
How to care for your Outdura Fabric:
To keep your Outdura fabrics looking beautiful, brush off any loose dirt as soon as possible and address spills and messes immediately. The faster you act, the easier it will be to remove any possible stains.
Stubborn stains require extra finesse. Filter by stain and fabric type to learn how to properly treat and clean.
Other Helpful Tips:
- Never dry clean fabric.
- Never use a steamer on fabric.
- If ironing is necessary, carefully iron on synthetic heat setting.
Do not steam. - If machine washing, allow fabric to air dry.
-
TEXGARD® CLEANER is the best way to clean your Outdura fabrics without harm; however, it may remove some of the water and stain resistant properties. To renew this resistance please use our TEXGARD® PROTECTOR - this product is matched to the finish of the fabric and is therefore best suited to restore protection.
TEXGARD® Cleaner and TEXGARD® Protector are intended for use on OUTDURA fabrics (PAN/PES) with a textile finish. We recommend performing a spot test before using them on non-Outdura fabrics.
These products are available from 1st of October. Please contact [email protected] to get more information.
Acrylic Fabric Spill and Stain Guide
Select stain type
How to clean:
- Remove spills with a brush.
- Rinse the fabric thoroughly, removing all residue.
Using a garden hose may make this step easier. - Spray TEXGARD® CLEANER onto the wet stained area.
- Let soak in for 3-10 minutes.
- Work in with a sponge or a soft scrubbing pad.
- Rinse the fabric thoroughly with clean water.
- Let fabric air dry completely.
- Renew protection for years:
Spray the TEXGARD® PROTECTOR with a
minimum distance of 8 to 12 inches. - Allow to dry completely for 24 hours.
What you’ll need:
- Soft brush
- Garden hose (if available)
- Sponge or scrubbing pad.
- TEXGARD CLEANER
- TEXGARD PROTECTOR
How to Care for your Outdura Fabric
To keep your Outdura fabrics looking beautiful, brush off any loose dirt as soon as possible and address spills and messes immediately. The faster you act, the easier it will be to remove any possible stains.
Stubborn stains require extra finesse. Filter by stain and fabric type to learn how to properly treat and clean.
Other helpful tips
- Never dry clean fabric.
- Never use a steamer on fabric.
- If ironing is necessary, carefully iron on synthetic heat setting.
Do not steam. - If machine washing, allow fabric to air dry.
-
TEXGARD® CLEANER is the best way to clean your Outdura fabrics without harm; however, it may remove some of the water and stain resistant properties. To renew this resistance please use our TEXGARD® PROTECTOR - this product is matched to the finish of the fabric and is therefore best suited to restore protection.
TEXGARD® Cleaner and TEXGARD® Protector are intended for use on OUTDURA fabrics (PAN/PES) with a textile finish. We recommend performing a spot test before using them on non-Outdura fabrics.
How to clean:
- Remove (don't rub) spills
with a clean, dry towel. - Mix a mild solution of dish detergent and warm water
(do not exceed 100° F). - Using a sponge, gently treat the affected area,
allowing the mixture to soak into the fabric. - Rinse the fabric thoroughly, removing all dish detergent residue.
Using a garden hose may make this step easier. - Wipe fabric with a clean, dry towel,
soaking up as much moisture as possible. - Let fabric air dry completely.
What you’ll need:
- Clean, dry cloth or kitchen towel
- Dish detergent
- Warm water (do not exceed 100° F)
- Dishwashing sponge
- Bucket of water or garden hose
How to Care for Your Outdura Fabric
To keep your Outdura fabrics looking beautiful, brush off any loose dirt as soon as possible and address spills and messes immediately. The faster you act, the easier it will be to remove any possible stains.
Stubborn stains require extra finesse. Filter by stain and fabric type to learn how to properly treat and clean.
Other Helpful Tips
- Never dry clean fabric.
- Never use a steamer on fabric.
- If ironing is necessary, carefully iron on synthetic heat setting.
Do not steam. - If machine washing, allow fabric to air dry.
-
TEXGARD® CLEANER is the best way to clean your Outdura fabrics without harm; however, it may remove some of the water and stain resistant properties. To renew this resistance please use our TEXGARD® PROTECTOR - this product is matched to the finish of the fabric and is therefore best suited to restore protection.
TEXGARD® Cleaner and TEXGARD® Protector are intended for use on OUTDURA fabrics (PAN/PES) with a textile finish. We recommend performing a spot test before using them on non-Outdura fabrics.
How to clean:
- Remove (don't rub) spills
with a clean, dry towel. - Rinse the fabric thoroughly, removing all residue.
Using a garden hose may make this step easier. - Wipe fabric with a clean, dry towel,
soaking up as much moisture as possible. - Let fabric air dry completely.
What you’ll need:
- Clean, dry cloth or kitchen towel
- Bucket of water or garden hose
How to Care for Your Outdura Fabric
To keep your Outdura fabrics looking beautiful, brush off any loose dirt as soon as possible and address spills and messes immediately. The faster you act, the easier it will be to remove any possible stains.
Stubborn stains require extra finesse. Filter by stain and fabric type to learn how to properly treat and clean.
- Never dry clean fabric.
- Never use a steamer on fabric.
- If ironing is necessary, carefully iron on synthetic heat setting.
Do not steam. - If machine washing, allow fabric to air dry.
-
TEXGARD® CLEANER is the best way to clean your Outdura fabrics without harm; however, it may remove some of the water and stain resistant properties. To renew this resistance please use our TEXGARD® PROTECTOR - this product is matched to the finish of the fabric and is therefore best suited to restore protection.
TEXGARD® Cleaner and TEXGARD® Protector are intended for use on OUTDURA fabrics (PAN/PES) with a textile finish. We recommend performing a spot test before using them on non-Outdura fabrics.
How to clean:
- Remove the chocolate and let the spill dry.
- Rub off the residue with a table knife or similar object.
- Mix a mild solution of dish detergent, vinegar,
baking powder and hot water. (do not exceed 100° F). - Apply mixture using a clean, dry cloth.
- Soaking up as much moisture as possible.
- Let fabric air dry completely.
What you’ll need:
- Table knife
- Dish detergent
- Vinegar
- Baking powder
- Hot water (do not exceed 100° F)
- Clean, dry cloth or towel
How to Care for Your Outdura Fabric
To keep your Outdura fabrics looking beautiful, brush off any loose dirt as soon as possible and address spills and messes immediately. The faster you act, the easier it will be to remove any possible stains.
Stubborn stains require extra finesse. Filter by stain and fabric type to learn how to properly treat and clean.
Other helpful tips
- Never dry clean fabric.
- Never use a steamer on fabric.
- If ironing is necessary, carefully iron on synthetic heat setting.
Do not steam. - If machine washing, allow fabric to air dry.
-
TEXGARD® CLEANER is the best way to clean your Outdura fabrics without harm; however, it may remove some of the water and stain resistant properties. To renew this resistance please use our TEXGARD® PROTECTOR - this product is matched to the finish of the fabric and is therefore best suited to restore protection.
TEXGARD® Cleaner and TEXGARD® Protector are intended for use on OUTDURA fabrics (PAN/PES) with a textile finish. We recommend performing a spot test before using them on non-Outdura fabrics.
How to clean:
- Remove (don't rub) spills
with a clean, dry towel. - Mix a mild solution of dish detergent and warm water
(do not exceed 100° F). - Using a sponge, gently treat the affected area,
allowing the mixture to soak into the fabric. - Rinse the fabric thoroughly, removing all dish detergent residue.
Using a garden hose may make this step easier. - Wipe fabric with a clean, dry towel,
soaking up as much moisture as possible. - Let fabric air dry completely.
What you’ll need:
- Clean, dry cloth or kitchen towel
- Dish detergent
- Warm water (do not exceed 100° F)
- Dishwashing sponge
- Bucket of water or garden hose
How to Care for Your Outdura Fabric
To keep your Outdura fabrics looking beautiful, brush off any loose dirt as soon as possible and address spills and messes immediately. The faster you act, the easier it will be to remove any possible stains.
Stubborn stains require extra finesse. Filter by stain and fabric type to learn how to properly treat and clean.
- Never dry clean fabric.
- Never use a steamer on fabric.
- If ironing is necessary, carefully iron on synthetic heat setting.
Do not steam. - If machine washing, allow fabric to air dry.
-
TEXGARD® CLEANER is the best way to clean your Outdura fabrics without harm; however, it may remove some of the water and stain resistant properties. To renew this resistance please use our TEXGARD® PROTECTOR - this product is matched to the finish of the fabric and is therefore best suited to restore protection.
TEXGARD® Cleaner and TEXGARD® Protector are intended for use on OUTDURA fabrics (PAN/PES) with a textile finish. We recommend performing a spot test before using them on non-Outdura fabrics.
How to clean:
- Remove the ice cream.
- Rinse the fabric thoroughly, removing all residue.
Using a garden hose may make this step easier. - Wipe fabric with a clean, dry towel,
soaking up as much moisture as possible. - Let fabric air dry completely.
What you’ll need:
- Clean, dry cloth or kitchen towel
- Bucket of water or garden hose
How to Care for Your Outdura Fabric
To keep your Outdura fabrics looking beautiful, brush off any loose dirt as soon as possible and address spills and messes immediately. The faster you act, the easier it will be to remove any possible stains.
Stubborn stains require extra finesse. Filter by stain and fabric type to learn how to properly treat and clean.
Other Helpful Tips
- Never dry clean fabric.
- Never use a steamer on fabric.
- If ironing is necessary, carefully iron on synthetic heat setting.
Do not steam. - If machine washing, allow fabric to air dry.
-
TEXGARD® CLEANER is the best way to clean your Outdura fabrics without harm; however, it may remove some of the water and stain resistant properties. To renew this resistance please use our TEXGARD® PROTECTOR - this product is matched to the finish of the fabric and is therefore best suited to restore protection.
TEXGARD® Cleaner and TEXGARD® Protector are intended for use on OUTDURA fabrics (PAN/PES) with a textile finish. We recommend performing a spot test before using them on non-Outdura fabrics.
How to clean:
- Rinse spills with water and wipe
with a clean, dry cloth. - Mix a mild solution
of vinegar and warm water. - Apply mixture using a spray bottle
and leave to soak for a few minutes. - If neccessary, apply a mild solution of dish detergent and warm water
(do not exceed 100° F). - Rinse the fabric thoroughly, removing all dish detergent residue.
Using a garden hose may make this step easier. - Wipe fabric with a clean, dry towel,
soaking up as much moisture as possible. - Let fabric air dry completely.
What you’ll need:
- Clean, dry cloth or kitchen towel
- Vinegar
- Water
- Spray bottle
- Optional: dish detergent and warm water (do not exceed 100° F)
- Bucket of water or garden hose
How to Care for Your Outdura Fabric
To keep your Outdura fabrics looking beautiful, brush off any loose dirt as soon as possible and address spills and messes immediately. The faster you act, the easier it will be to remove any possible stains.
Stubborn stains require extra finesse. Filter by stain and fabric type to learn how to properly treat and clean.
- Never dry clean fabric.
- Never use a steamer on fabric.
- If ironing is necessary, carefully iron on synthetic heat setting.
Do not steam. - If machine washing, allow fabric to air dry.
-
TEXGARD® CLEANER is the best way to clean your Outdura fabrics without harm; however, it may remove some of the water and stain resistant properties. To renew this resistance please use our TEXGARD® PROTECTOR - this product is matched to the finish of the fabric and is therefore best suited to restore protection.
TEXGARD® Cleaner and TEXGARD® Protector are intended for use on OUTDURA fabrics (PAN/PES) with a textile finish. We recommend performing a spot test before using them on non-Outdura fabrics.
How to clean:
- Remove (don't rub) spills
with a clean, dry towel. - Rinse the fabric thoroughly, removing all residue.
Using a garden hose may make this step easier. - Wipe fabric with a clean, dry towel,
soaking up as much moisture as possible. - Let fabric air dry completely.
What you’ll need:
- Clean, dry cloth or kitchen towel
- Bucket of water or garden hose
How to Care for Your Outdura Fabric
To keep your Outdura fabrics looking beautiful, brush off any loose dirt as soon as possible and address spills and messes immediately. The faster you act, the easier it will be to remove any possible stains.
Stubborn stains require extra finesse. Filter by stain and fabric type to learn how to properly treat and clean.
- Never dry clean fabric.
- Never use a steamer on fabric.
- If ironing is necessary, carefully iron on synthetic heat setting. Do not steam.
- If machine washing, allow fabric to air dry.
-
TEXGARD® CLEANER is the best way to clean your Outdura fabrics without harm; however, it may remove some of the water and stain resistant properties. To renew this resistance please use our TEXGARD® PROTECTOR - this product is matched to the finish of the fabric and is therefore best suited to restore protection.
TEXGARD® Cleaner and TEXGARD® Protector are intended for use on OUTDURA fabrics (PAN/PES) with a textile finish. We recommend performing a spot test before using them on non-Outdura fabrics.
How to clean:
- Remove spills with a brush.
- Rinse the fabric thoroughly, removing all residue.
Using a garden hose may make this step easier. - Wipe fabric with a clean, dry towel,
soaking up as much moisture as possible. - If needed clean with a detergent.
- Using a sponge, gently treat the affected area,
allowing the detergent to soak into the fabric. - Rinse the fabric thoroughly, removing all detergent residue.
- Wipe fabric with a clean, dry towel,
soaking up as much moisture as possible. - Let fabric air dry completely.
What you’ll need:
- Bucket of water or garden hose
- Clean, dry cloth or kitchen towel
- Soft brush
- Detergent
- Dishwashing sponge
How to Care for Your Outdura Fabric
To keep your Outdura fabrics looking beautiful, brush off any loose dirt as soon as possible and address spills and messes immediately. The faster you act, the easier it will be to remove any possible stains.
Stubborn stains require extra finesse. Filter by stain and fabric type to learn how to properly treat and clean.
- Never dry clean fabric.
- Never use a steamer on fabric.
- If ironing is necessary, carefully iron on synthetic heat setting.
Do not steam. - If machine washing, allow fabric to air dry.
-
TEXGARD® CLEANER is the best way to clean your Outdura fabrics without harm; however, it may remove some of the water and stain resistant properties. To renew this resistance please use our TEXGARD® PROTECTOR - this product is matched to the finish of the fabric and is therefore best suited to restore protection.
TEXGARD® Cleaner and TEXGARD® Protector are intended for use on OUTDURA fabrics (PAN/PES) with a textile finish. We recommend performing a spot test before using them on non-Outdura fabrics.
How to clean:
- Rinse spills with water and soak up (don't wipe)
with a clean, dry towel. - Dust stain with baking soda
and leave to soak for 30 minutes. - Rinse throroughly with water and
gently scrub with a bristle brush. - If neccessary, apply a mild solution of dish detergent and warm water
(do not exceed 100° F). - Rinse the fabric thoroughly, removing all residue.
Using a garden hose may make this step easier. - Wipe fabric with a clean, dry towel,
soaking up as much moisture as possible. - Let fabric air dry completely.
What you’ll need:
- Clean, dry cloth or kitchen towel
- Baking soda
- Soft bristle brush
- Optional: dish detergent and warm water (do not exceed 100° F)
- Bucket of water or garden hose
How to Care for Your Outdura Fabric
To keep your Outdura fabrics looking beautiful, brush off any loose dirt as soon as possible and address spills and messes immediately. The faster you act, the easier it will be to remove any possible stains.
Stubborn stains require extra finesse. Filter by stain and fabric type to learn how to properly treat and clean.
- Never dry clean fabric.
- Never use a steamer on fabric.
- If ironing is necessary, carefully iron on synthetic heat setting.
Do not steam. - If machine washing, allow fabric to air dry.
-
TEXGARD® CLEANER is the best way to clean your Outdura fabrics without harm; however, it may remove some of the water and stain resistant properties. To renew this resistance please use our TEXGARD® PROTECTOR - this product is matched to the finish of the fabric and is therefore best suited to restore protection.
TEXGARD® Cleaner and TEXGARD® Protector are intended for use on OUTDURA fabrics (PAN/PES) with a textile finish. We recommend performing a spot test before using them on non-Outdura fabrics.
How to clean:
- Remove (don't rub) spills
with a clean, dry towel. - Rinse the fabric thoroughly, removing all residue.
Using a garden hose may make this step easier. - Wipe fabric with a clean, dry towel,
soaking up as much moisture as possible. - Let fabric air dry completely.
What you’ll need:
- Clean, dry cloth or kitchen towel
- Bucket of water or garden hose
How to Care for Your Outdura Fabric
To keep your Outdura fabrics looking beautiful, brush off any loose dirt as soon as possible and address spills and messes immediately. The faster you act, the easier it will be to remove any possible stains.
Stubborn stains require extra finesse. Filter by stain and fabric type to learn how to properly treat and clean.
- Never dry clean fabric.
- Never use a steamer on fabric.
- If ironing is necessary, carefully iron on synthetic heat setting.
Do not steam. - If machine washing, allow fabric to air dry.
-
TEXGARD® CLEANER is the best way to clean your Outdura fabrics without harm; however, it may remove some of the water and stain resistant properties. To renew this resistance please use our TEXGARD® PROTECTOR - this product is matched to the finish of the fabric and is therefore best suited to restore protection.
TEXGARD® Cleaner and TEXGARD® Protector are intended for use on OUTDURA fabrics (PAN/PES) with a textile finish. We recommend performing a spot test before using them on non-Outdura fabrics.
How to clean:
- Spray the stain with hair spray.
- Wipe off the stain with a clean, dry cloth.
- Wash the fabric in the washing machine.
- Let fabric air dry completely.
What you’ll need:
- Hair spray
- Clean, dry cloth
- Washing machine
How to Care for Your Outdura Fabric
To keep your Outdura fabrics looking beautiful, brush off any loose dirt as soon as possible and address spills and messes immediately. The faster you act, the easier it will be to remove any possible stains.
Stubborn stains require extra finesse. Filter by stain and fabric type to learn how to properly treat and clean.
Other Helpful Tips
- Never dry clean fabric.
- Never use a steamer on fabric.
- If ironing is necessary, carefully iron on synthetic heat setting.
Do not steam. - If machine washing, allow fabric to air dry.
-
TEXGARD® CLEANER is the best way to clean your Outdura fabrics without harm; however, it may remove some of the water and stain resistant properties. To renew this resistance please use our TEXGARD® PROTECTOR - this product is matched to the finish of the fabric and is therefore best suited to restore protection.
TEXGARD® Cleaner and TEXGARD® Protector are intended for use on OUTDURA fabrics (PAN/PES) with a textile finish. We recommend performing a spot test before using them on non-Outdura fabrics.
How to clean:
- Rinse spills with water and soak up (don't wipe)
with a clean, dry towel. - Mix a mild solution of dish detergent and warm water
(do not exceed 100° F). - Using a sponge, gently treat the affected area,
allowing the mixture to soak into the fabric. - Rinse the fabric thoroughly, removing all dish detergent residue.
Using a garden hose may make this step easier. - Wipe fabric with a clean, dry towel,
soaking up as much moisture as possible. - Let fabric air dry completely.
What you’ll need:
- Clean, dry cloth or kitchen towel
- Dish detergent
- Warm water (do not exceed 100° F)
- Dishwashing sponge
- Bucket of water or garden hose
How to Care for Your Outdura Fabric
To keep your Outdura fabrics looking beautiful, brush off any loose dirt as soon as possible and address spills and messes immediately. The faster you act, the easier it will be to remove any possible stains.
Stubborn stains require extra finesse. Filter by stain and fabric type to learn how to properly treat and clean.
- Never dry clean fabric.
- Never use a steamer on fabric.
- If ironing is necessary, carefully iron on synthetic heat setting.
Do not steam. - If machine washing, allow fabric to air dry.
-
TEXGARD® CLEANER is the best way to clean your Outdura fabrics without harm; however, it may remove some of the water and stain resistant properties. To renew this resistance please use our TEXGARD® PROTECTOR - this product is matched to the finish of the fabric and is therefore best suited to restore protection.
TEXGARD® Cleaner and TEXGARD® Protector are intended for use on OUTDURA fabrics (PAN/PES) with a textile finish. We recommend performing a spot test before using them on non-Outdura fabrics.
The Outdura Difference
Our fabric is woven to last, ensuring durability for every everyday moment
and whatever life has in store.
100% Solution- Dyed Acrylic
Fade, Water and Stain Resistance
Better, Softer Feel
Superior Wear Resistance
Superior Cleanability
10-Year Promise
Guaranteed Quality,
Durability and Color
Produced with pride in North Carolina, made with the highest quality standards in the industry and backed by our 10-Year Promise. Enjoy the brilliance and beauty of Outdura fabrics for years to come.